Fork Cap Socket - BMW DDC Spades & Ring Terminals

Fork Cap Socket - BMW DDC Spades & Ring TerminalsSpecially designed to fit the fork caps found on the DDC forks fitted with electronic control. The socket is designed to fit on 7 of the 8 flats on the fork cap. Equipped with a 21mm wiring slot to allow the socket to fit snugly over the fork control wiring harness. Applications include: BMW S1000RR DDC fork cap (8 flats type). Width across flats = 49mm, 21mm wiring loom slot. Machined from POM (Acetal) engineering plastic for strength with non

749 Biposto/Monoposto/Dark

CB900 F/F2 '80-'82

This tool is essential to correctly align the clutch of BMW motorcycles

With a central bolt length 100mm

Spare stud extractors available

1/2"D has Go Thru up to 19mm

Features include:

the Laser 8025 rear wheel nut socket has been specially designed to fit the KTM rear wheel nut on the 1290 Super Duke

It won't stop a 4 pound lump hammer dropped from six feet

The softgrip handle is really nice and comfortable to use

XR250R '84-'91

The tapered pins locate in the stud holes making it much easier to remove valves and lap faces etc