Borgeson - Steering Shaft - P/N: 419282 - Stainless steel splined steering shaft. 3/4 in. Diameter with 36 splines. 14.75 in. Long, splined 7/8 in. on each end. 1947 Chevy Truck

Borgeson - Steering Shaft - P/N: 419282 - Stainless steel splined steering shaft. 3/4 in. Diameter with 36 splines. 14.75 in. Long, splined 7/8 in. on each end. 1947 Chevy TruckBorgeson stainless steel splined steering shafts have a 3 4" 36 spline. Stainless steel shafts have 7 8" of spline on each end and are available in 1 4" increments from 3" 24" and 1" increments from 24" 36". Borgeson is sure to have the stainless steel shaft that your project needs.

For floor shift applications only

These springs are specifically designed to work with late model/open drivelines

Core Width  26

Core Width 23

Dynamat Xtreme Custom Cut Sound Deadening Kit to cover the trunk floor of a 1970-1981 Chevrolet Camaro / GM F-Body

4 inch with cap

quiet ride in a Ford Mustang

Dynamat Xtreme Custom Cut Kit to cover the inner and outer skins of both doors in a 1982-1992 Chevrolet Camaro / GM F-Body

Dynamat Xtreme Custom Cut Kit to cover the inner and outer skins of both doors on a 2005-2014 Ford Mustang

Verify Perch Distances for Stock Ford Rear Axles

you can run this radiator and either run a separate transmission cooler or re-route your trans lines to the driver side of the radiator OR run our GMT558A standard high flow C10 radiator with a 2 piece upper hose that goes to the drivers side inlet (use a 'T' fitting in between the 2 hoses for the steam port)

1955-1957 Chevrolet Tr-Five Aluminum Performance Radiator