90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (16.0 mm OD, 101.6 mm CLR) 7/8" OD

90 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (16.0 mm OD, 101.6 mm CLR) 7/8" ODSpecs Outside Diameter of the Tubing (OD): 16. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 4" (101. 6 mm) Maximum Degree of Bend: 90, after springback Includes Steel Main Die Steel Backing Block Steel U Strap Resources Tube and Pipe Bending Basics What Am I Bending: The

Our benders are rated for bending mild steel square at a wall thickness between 0

it uses terms like front

Includes: 1-3/4" Dimple Dies | Requires 1-3/4" Pilot Hole

Steel Main Die

1" x 1/2" Rectangular - Easyway

after springback

1-1/4" (w) x 1/2" (leg) Channel Stock - Easyway

Cutting instructions including fish-mouthing

Includes: 1-1/4" Dimple Die | Requires 1-1/4" Pilot Hole

Forms quality

Rectangular Tubing

Outside Diameter of the Tubing (OD): 10